Conventional Gas Station Type
A conventional gas station is built where a natural gas pipeline passes through. It draws gas directly from the pipeline at an inlet pressure of 0.4 MPa. The natural gas undergoes desulfurization and dehydration processes before being compressed to a pressure of 25 MPa. It then enters a gas dispenser to refuel vehicles. The typical refueling capacity is between 600-1000 Nm³/h (standard cubic meters per hour).
Mother Station Type
A mother station draws gas directly from the natural gas pipeline at an inlet pressure of 1-1.5 MPa. After desulfurization and dehydration processes, the gas is compressed and then transported to daughter stations via tank trucks equipped with storage cylinders (25 MPa) for vehicle refueling. It also functions as a conventional station. Mother stations are often built near city gate stations, and their refueling capacity is between 2500-4000 Nm³/h.
Substation Type
Substations are built in locations where there are no natural gas pipelines around the gas station. They are typically built in cities to facilitate vehicle refueling, or in industrial areas of towns and villages without gas pipelines, supplying natural gas as an energy source. The mother station uses compressors to pressurize and store natural gas, then a special transport vehicle delivers 25MPa compressed natural gas to the substation, where it is then used to refuel CNG vehicles. For substations in industrial areas, the process flow is briefly described as follows: Low-pressure or medium-pressure natural gas is pressurized to 20-25MPa by a compressor, compressed into specially designed steel cylinders or tubing, placed on a skid with a traction mechanism, and transported to the substation. It is then connected to an unloading column and enters the CNG pressure regulating equipment via an unloading system. The pressure is reduced by a pressure reducing skid to the user's required pressure of 0.2-0.4MPa before entering the pipeline network to supply natural gas to users.






