LNG refueling function: LNG in the storage tank is extracted and pressurized by an LNG cryogenic pump, and then refueled to the vehicle via a refueling machine.
Unloading function: LNG in the LNG tanker is pumped to the LNG storage tank by a cryogenic pump.
Pressure boosting function: A portion of the LNG in the storage tank is injected into a vaporizer to vaporize it into BOG (Boil Off Gas) and enters the storage tank. The process stops when the storage tank pressure reaches the set pressure.
Temperature control function: A portion of LNG is extracted from the storage tank by an LNG cryogenic pump and injected into a heater before entering the storage tank. The process stops when the liquid temperature reaches the set temperature.
A typical pure LNG refueling station consists of: an LNG storage tank, a pump skid and submersible pump, a storage tank pressurization vaporizer, an unloading vaporizer, an EAG heater (these three vaporizers may vary depending on the process flow), and a refueling machine.






