sales@tjbaiyan.com    +86-022-88988337
Cont

Have any Questions?

+86-022-88988337

Skid-Mounted Containerized Station
video
Skid-Mounted Containerized Station

Skid-Mounted Containerized Station

The LNG refueling unit is a dedicated system for injecting liquefied natural gas (LNG) into LNG dispensers, typically using LNG with a pressure ≤ 1.2 MPa and a temperature range of -162°C to -118°C. The system includes key components such as the LNG storage system, piping system (including submersible pumps), and control system.
Send Inquiry

Product Introduction

product-1440-810
LNG Refueling Integrated Station Overview

The LNG refueling unit is a dedicated system for injecting liquefied natural gas (LNG) into LNG dispensers, typically using LNG with a pressure ≤ 1.2 MPa and a temperature range of -162°C to -118°C. The system includes key components such as the LNG storage system, piping system (including submersible pumps), and control system.

 

 

Permitted Medium

Liquefied Natural Gas (LNG)

Design Temperature: -196°C
Operating Pressure:

Before pump: 1.2 MPa
After pump: 1.6 MPa

Design Pressure:

Before pump: 1.6 MPa
After pump: 1.92 MPa

Process Flow (specific processes may vary based on user requirements):

The LNG process flow can be divided into three main parts: the unloading process, refueling process, and depressurizing process.

product-1440-1080

 

product-1440-810

 

Unloading Process

LNG is transferred from the transport tank to the LNG storage tank at the refueling station. The LNG enters the storage tank through the top and bottom liquid inlets. Gasified natural gas is pumped into the LNG tanker via the unloading booster to increase the vapor pressure inside the tanker, thereby pushing LNG into the storage tank. This process requires boosting the tanker's pressure, and once the unloading is complete, the pressure in the tanker is reduced.

 

Refueling Process

 

product-800-800

The LNG from the storage tank is pressurized by a pump and measured using a flow meter before being dispensed into the vehicle via the refueling gun. The onboard gas cylinders use an upper liquid inlet spray system, where the incoming LNG absorbs the heat from the gas in the vehicle's cylinder, lowering the internal pressure. This helps to reduce venting of gas and speeds up the refueling process.

 

Depressurizing Process

 

Due to external heat influx, the gas generated from the LNG vaporization may increase system pressure. When the system pressure exceeds the preset value, the safety valve opens to release excess gas and lower the pressure, ensuring the system operates safely.

 

Hot Tags: skid-mounted containerized station, China skid-mounted containerized station manufacturers, suppliers, factory, LNG Station Management System, Measurement And Control System, Single Pump Systerm, Point Of Sale SystemPOS System, Skid Mounted Containerized Station, Containerized Integrated Station

Send Inquiry

(0/10)

clearall