sales@tjbaiyan.com    +86-022-88988337
Cont

Have any Questions?

+86-022-88988337

Feb 17, 2026

Marine Fuel Tank LNG Vaporization/heating System

The function of the LNG vaporization/heating system is to vaporize liquefied natural gas through heat exchange and heat it to a temperature permissible by the engine. A typical vaporizer and heater utilize a container-type heat exchanger with a low-temperature resistant stainless steel outer shell and a stainless steel spiral coil structure for the inner tubing to prevent vapor lock. The vaporization heater can be integrated with the gas buffer tank, PBU booster evaporator or booster pump, necessary safety valves and cryogenic shut-off valves, as well as pressure gauges and thermometers, into a gas-tight cold box, forming a vaporization heater skid. This cold box must be equipped with an effective suction-type mechanical ventilation system with a ventilation capacity of at least 30 air changes per hour. The ventilation system should operate continuously when the engine is in gas mode.

 

Depending on the ship's layout, the vaporization heating system can also be integrated into the gas tank connection area of ​​the fuel tank. This saves space compared to a separate vaporization heater skid, facilitating shipyard construction. After installation on board, a gas tightness test of at least 0.02 MPa should be conducted at the gas tank connection area.

Send Inquiry