A hydrogen refueling station consists of a hydrogen unloading system, a pressurization system, a hydrogen storage system, and a hydrogen refueling system. The unloading system mainly comprises a long-tube trailer for transporting hydrogen and an unloading column.
The most crucial equipment in the entire hydrogen refueling station is the hydrogen compressor, the high-pressure hydrogen storage tank, and the hydrogen dispenser. The hydrogen compressor is the most critical core unit, accounting for approximately 35% of the construction cost of a hydrogen refueling station. For externally supplied hydrogen refueling stations, the compressor cost accounts for approximately 30% of the construction cost.
Compressors used in hydrogen refueling stations mainly fall into three technical categories: diaphragm compressors, liquid-driven compressors, and ion compressors. Diaphragm compressors are the mainstream product, with a market share exceeding 60%; liquid-driven compressors have a market share of approximately 30%. Diaphragm compressors offer advantages such as no contamination or leakage during compression, high compression ratio, and high exhaust pressure, but also suffer from insufficient adaptability to operating conditions, a higher failure rate, and poor maintenance convenience. Liquid-driven diaphragm compressors offer advantages such as adaptability to frequent start-stop cycles, modular design, and small size, and may become the next generation of mainstream products. The first set of 90MPa liquid-driven and diaphragm-type hydrogen booster and refueling equipment has been successfully applied in China.






