Intelligent Gas Flow Management System for CNG Stations
Product Introduction
The CNG Sequential Control Panel serves as the "intelligent dispatch center" between the CNG storage system and the CNG dispenser at a fueling station.
Like a traffic controller, it determines which storage cylinder bank supplies gas, in what sequence, and at what pressure, ensuring fast, stable, and efficient CNG fueling.
This system plays a critical role in optimizing compressed natural gas (CNG) flow management, especially in stations where continuous compressor output must match random, high-speed vehicle fueling demand.

Technical Specifications
|
Model |
BYSK-2500 |
|
Maximum Flow Rate |
2,500 m³/h |
|
Design Pressure |
27.5 MPa |
|
Working Pressure |
25 MPa |
|
Pressure Regulation Range |
1 MPa – 24 MPa |
|
Inlet / Outlet Connection |
Ø22 mm high-pressure stainless steel tubing |
|
Overall Dimensions |
640 × 350 × 1332 mm |
Core Function & Control Logic
The core mission of the CNG Sequential Control Panel is to resolve a fundamental challenge in CNG stations:
Balancing continuous gas supply from compressors with random, high-speed vehicle fueling demand.
This is achieved through an advanced priority and sequential control strategy, operating in two key stages:
1. Storage Cylinder Filling (Sequential Charging)
When the compressor starts, gas is supplied in sequence according to pressure levels:
Priority filling of high-pressure storage banks
Followed by medium-pressure and then low-pressure cylinder banks
This ensures efficient utilization of compressor output and maximizes storage system capacity
2. Vehicle Fueling (Priority Gas Withdrawal)
During vehicle fueling, the system applies the reverse logic:
Gas is drawn first from low-pressure storage banks, then from higher-pressure banks
This approach maximizes energy utilization across pressure levels
Results in faster fueling speed, smoother pressure transition, and reduced system fluctuation
Working Principle
Compressed natural gas is distributed to each independent storage cylinder bank according to pressure hierarchy.
During filling, gas is injected in a controlled sequence until all storage banks reach equalized pressure.
During operation, the system continuously replenishes lower-pressure storage banks, ensuring the entire system remains at optimal rated pressure, ready for rapid fueling demand.
Our factory & quipment



Key Benefits & Selection Advantages
A high-quality CNG Sequential Control Panel delivers significant operational value to a CNG fueling station:
✔ Higher Efficiency & Energy Savings
Optimized gas flow paths reduce pressure losses
Improves fueling speed while lowering compressor energy consumption
✔ Enhanced Safety & Operational Stability
Equipped with high-quality valves and fittings
Features overpressure relief, safety venting, and reliable isolation functions
Designed for long-term, fault-free operation
✔ Extended Equipment Lifetime
Smooth pressure regulation reduces frequent compressor start-stop cycles
Protects compressors and downstream equipment
Why It Matters
Although the CNG Sequential Control Panel operates behind the scenes and is not directly visible to end users, it is a key enabler of efficient, economical, and safe CNG station operation.
Choosing a technically advanced and reliable CNG priority control panel is a critical investment in building a modern, high-performance compressed natural gas fueling station.

Hot Tags: priority control panel, China priority control panel manufacturers, suppliers, factory, apply cng pump, cng fuel at home, cng gas bunk, cng testing station, high pressure cng pump, compressor cng









